Serial No.:
Price (ex work):
NOW SOLD, NEW STOCK COMING SOON
Description:
| SPECIFICATION | |
| Centres | |
| Height | 167mm |
| Admits between | 635mm |
| Swing | |
| Over bed | 330mm |
| Over cross slide | 210mm |
| In gap : diameter | 480mm |
| In gap : length | 115mm |
| Spindle | |
| Bored to pass | 38mm |
| Nose | No. 4 DI Camlock |
| Morse taper in nose | No. 5 |
| Morse taper in bush | No. 3 |
| Speeds | |
| Number | 12 |
| Progression ratio | 1.46 |
| Range | 40-2500rpm |
| Leadscrew | |
| Diameter | 28mm |
| Threads | |
| Metric pitches (45) | from 0.2 – 14mm pitch |
| English pitches (52) | from 2 to 56 tpi |
| Module pitches (18) | from 0.3 – 3.5 MOD |
| Diametral pitches (18) | from 8 – 56 DP |
| Feeds | |
| Longitudinal : Metric (21) | from .03 to 2mm/rev |
| Longitudinal : English (21) | from .001 – .080 in/rev |
| Cross feeds half longitudinal values | |
| Cross Slide | |
| Width | 140mm |
| Travel | 190mm |
| Top Slide | |
| Width | 82mm |
| Travel | 92mm |
| Tool | |
| Max. section | 16 x 20mm |
| Tailstock | |
| Quill diameter | 42mm |
| Travel | 110mm |
| Morse taper | No. 3 |
| Set over | +/- 12mm |
| Motor | |
| 1500 rpm @ 50 Hz | 2.2kW |
| Machine in metric execution |
YEAR 1986
| MACHINE EQUIPPED WITH |
| 2 axis DRO system |
| 3 Jaw chuck |
| Quick change toolpost and 2 off toolholders |
| Chuck guard |
| Lighting |
| Rear splashguard |
| Coolant system |
WHILST EVERY CARE HAS BEEN TAKEN TO GIVE THE CORRECT TECHNICAL SPECIFICATION OF THE ABOVE MACHINE NO GUARANTEE IS GIVEN AS TO ACCURACY OF THIS INFORMATION. ALL SPECIFICATIONS SHOULD BE CHECKED BY THE PURCHASER.